This is an experimental graph of all skipped and
failed builds for packages in buildenv amd64-7,
including the ports that depend on them.
Note: leaves are NOT included in this graph; see below.
| portname |
status |
|
accessibility/linux-f10-atk |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
accessibility/linux-f8-atk |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
archivers/kzip |
IGNORE: is restricted: License does not allow redistribution |
|
archivers/linux-f10-ucl |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
archivers/linux-f10-upx |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
archivers/linux-f8-ucl |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
archivers/linux-f8-upx |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
astro/boinc-einsteinathome |
IGNORE: is out of work units. No FreeBSD app exists for current batch of work |
|
audio/aacplusenc |
IGNORE: is restricted: unclear legal status, probably need licenses from 3GPP, Via Licensing and Coding Technologies |
|
audio/akode-plugins-ffmpeg |
IGNORE: is marked as broken: does not compile with ffmpeg 0.5 and later |
|
audio/ardour |
IGNORE: is marked as broken: does not compile |
|
audio/audacious-mac |
IGNORE: does not work with audacious 2 and audacious-plugins already deliveres a demac plugin |
|
audio/aureal-kmod |
IGNORE: is only for i386, while you are running amd64 |
|
audio/beep |
IGNORE: is only for i386, while you are running amd64 |
|
audio/bmp-festalon |
IGNORE: is only for i386 ppc, while you are running amd64 |
|
audio/ccaudio |
IGNORE: is marked as broken: Does not build with libtool 2.2. |
|
audio/dino |
IGNORE: is marked as broken: does not compile |
|
audio/emu10kx |
IGNORE: is marked as broken: does not compile |
|
audio/festalon |
IGNORE: is only for i386 ppc, while you are running amd64 |
|
audio/festvox-us1-mbrola |
IGNORE: requires the us1 MBROLA voice. Install the audio/mbrolavox port and enable the us1 voice in the options dialog, then install this port |
|
audio/festvox-us2-mbrola |
IGNORE: requires the us2 MBROLA voice. Install the audio/mbrolavox port and enable the us2 voice in the options dialog, then install this port |
|
audio/festvox-us3-mbrola |
IGNORE: requires the us3 MBROLA voice. Install the audio/mbrolavox port and enable the us3 voice in the options dialog, then install this port |
|
audio/fmio |
IGNORE: is only for i386, while you are running amd64 |
|
audio/gigedit |
error: mtree |
|
audio/gmpc-autoplaylist |
IGNORE: does not work with new gmpc |
|
audio/gmpc-favorites |
IGNORE: does not work with new gmpc |
|
audio/gmpc-mserver |
IGNORE: does not work with new gmpc |
|
audio/gmpc-qosd |
IGNORE: does not work with new gmpc |
|
audio/gmpc-random-playlist |
IGNORE: does not work with new gmpc |
|
audio/gmpc-stopbutton |
IGNORE: does not work with new gmpc |
|
audio/gogo-petit |
IGNORE: is only for i386, while you are running amd64 |
|
audio/gqradio |
IGNORE: is only for alpha i386 ia64, while you are running amd64 |
|
audio/gtkpod |
error: mtree |
|
audio/linux-f10-alsa-lib |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f10-arts |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f10-esound |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f10-freealut |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f10-libaudiofile |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f10-libogg |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f10-libvorbis |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f10-mikmod |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f10-openal |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f10-sdl_mixer |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f8-alsa-lib |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f8-arts |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f8-esound |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f8-freealut |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f8-libaudiofile |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f8-libogg |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f8-libvorbis |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f8-mikmod |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f8-openal |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/linux-f8-sdl_mixer |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
audio/muine |
IGNORE: is marked as broken: doesn't build and is apparently unmaintained |
|
audio/ocp |
IGNORE: is only for i386, while you are running amd64 |
|
audio/openspc |
IGNORE: is only for i386, while you are running amd64 |
|
audio/playgsf |
IGNORE: is only for i386, while you are running amd64 |
|
audio/playmidi |
IGNORE: is an interactive port |
|
audio/py-flac |
IGNORE: has been abandoned, needs rewrite for FLAC 1.1.3+ |
|
audio/py-libmpdclient |
error: install_error |
|
audio/rezound |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
audio/smasher |
IGNORE: is only for i386, while you are running amd64 (reason: At the momment does not build on AMD64 ia64) |
|
audio/sphinx |
IGNORE: is only for i386, while you are running amd64 |
|
audio/teamspeak_server |
IGNORE: is only for i386, while you are running amd64 |
|
audio/xmms-festalon |
IGNORE: is only for i386 ppc, while you are running amd64 |
|
audio/xmms-openspc |
IGNORE: is only for i386, while you are running amd64 |
|
audio/xmms-quix3dn |
IGNORE: is only for i386, while you are running amd64 |
|
audio/xmms-sexyspc |
IGNORE: is only for i386, while you are running amd64 |
|
audio/xmradio |
IGNORE: is only for i386 ia64, while you are running amd64 |
|
audio/xoscope |
IGNORE: is only for i386, while you are running amd64 |
|
biology/belvu |
IGNORE: there are also executables for Alpha and Sparc but they are for OSF and Solaris ... do they run on FreeBSD-Sparc and FreeBSD-alpha? |
|
biology/blast |
IGNORE: is restricted: License does not allow redistribution of binaries. You should first register for the software, which is free for academic use. |
|
biology/consed |
IGNORE: is restricted: Redistribution is not permitted in any form. You must request access permission via e-mail to get the tarball. Free for academic use. |
|
biology/distribfold |
IGNORE: is only for i386, while you are running amd64 |
|
biology/dotter |
IGNORE: is only for i386, while you are running amd64 |
|
biology/finchtv |
IGNORE: is only for i386, while you are running amd64 |
|
cad/alliance |
IGNORE: is marked as broken: does not compile |
|
cad/opencascade-tutorial |
IGNORE: no instructions to build the tutorial |
|
cad/scv |
IGNORE: is restricted: You have to register at http://www.systemc.org/account/register.php first |
|
chinese/big5con |
IGNORE: is only for i386, while you are running amd64 |
|
chinese/chinput3 |
IGNORE: is marked as broken: Does not compile on !i386 |
|
chinese/dfsongsd |
IGNORE: is restricted: 'No redistribution or commercial use is allowed.' |
|
chinese/firebird |
IGNORE: is an interactive port |
|
chinese/gbk2uni |
IGNORE: is marked as broken: does not fetch |
|
chinese/gcin-devel |
IGNORE: is only for i386, while you are running amd64 |
|
chinese/iiimf-le-newpy |
IGNORE: is only for i386, while you are running amd64 |
|
chinese/iiimf-le-ude |
IGNORE: is only for i386, while you are running amd64 |
|
chinese/iiimf-le-xcin |
IGNORE: is marked as broken: does not build |
|
chinese/kon2 |
IGNORE: is only for i386, while you are running amd64 |
|
chinese/msttf |
IGNORE: is restricted: 'Redistribution of pre-compiled binaries is not permitted' |
|
chinese/wangttf |
NO_PACKAGE: Package will be 216MB, set FORCE_PACKAGE if you really want to build it |
|
chinese/zhcon |
IGNORE: is only for i386, while you are running amd64 |
|
comms/dfu-util |
IGNORE: requires new USB stack in FreeBSD 8 |
|
comms/hcfmdm |
IGNORE: is restricted: Redistribution of versions marked lnxtbeta requires explicit written approval from Linuxant |
|
comms/hso-kmod |
IGNORE: requires kernel source files |
|
comms/ib-kmod |
IGNORE: is only for i386, while you are running amd64 |
|
comms/libfec |
IGNORE: is only for i386, while you are running amd64 |
|
comms/linrad |
IGNORE: is only for i386, while you are running amd64 |
|
comms/ltmdm |
IGNORE: is restricted: Unknown license type for binary object file ltmdmobj.o |
|
comms/soundmodem |
IGNORE: is only for i386, while you are running amd64 |
|
comms/twpsk |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
comms/uticom |
IGNORE: is only for i386, while you are running amd64 |
|
converters/mimelib |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
converters/pecl-fribidi |
(unknown) |
|
converters/ruby-lv |
IGNORE: is marked as broken: 'Does not build on amd64 (Needs to link against shared library)' |
|
databases/clip |
IGNORE: is marked as broken: Does not compile on !i386 |
|
databases/erserver |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
databases/firebird-server |
IGNORE: Client does not compile with GCC 4.2. Please use firebird2 instead |
|
databases/gnats |
IGNORE: is forbidden: Security issues |
|
databases/jdbc-oracle8i |
IGNORE: is restricted: 'Must be downloaded direct from Oracle via www interface' |
|
databases/jdbc-oracle9i |
IGNORE: is restricted: 'Must be downloaded direct from Oracle via www interface' |
|
databases/libgda4-jdbc |
IGNORE: is marked as broken: does not configure |
|
databases/libudbc |
IGNORE: is restricted: 'Downloading and redistribution terms are unclear' |
|
databases/linux-f10-sqlite3 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
databases/linux-f8-sqlite3 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
databases/linux-oracle-instantclient-sdk |
IGNORE: is restricted: Packaging prohibited by Oracle license |
|
databases/linux-oracle-instantclient-sqlplus |
IGNORE: is restricted: Packaging prohibited by Oracle license |
|
databases/msql3 |
IGNORE: is restricted: 'restrictive copyright (no commercial use)' |
|
databases/mysql++ |
IGNORE: does not run on amd64 sparc64, while you are running amd64 (reason: Fails to compile) |
|
databases/mysql323-scripts |
IGNORE: cannot install: MySQL versions mismatch: mysql41-client is installed and wanted version is mysql323-client |
|
databases/mysql323-server |
IGNORE: cannot install: MySQL versions mismatch: mysql41-client is installed and wanted version is mysql323-client |
|
databases/p5-sqlrelay |
IGNORE: is marked as broken: 'Does not build' |
|
databases/pecl-sqlite |
IGNORE: Please use databases/php5-sqlite |
|
databases/qt-ibase-plugin |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
databases/sqldeveloper |
IGNORE: is restricted: Packaging prohibited by Oracle license |
|
databases/sybase-ocsd |
IGNORE: is only for i386, while you are running amd64 |
|
databases/sybase_ase |
IGNORE: is restricted: 'Please see the license' |
|
databases/tora |
IGNORE: is only for i386, while you are running amd64 |
|
databases/virtuoso |
IGNORE: is only for i386, while you are running amd64 |
|
deskutils/q4wine |
IGNORE: is only for i386, while you are running amd64 (reason: depends on wine which is only available for i386) |
|
devel/a2dev |
IGNORE: is marked as broken: Does not compile on !i386 |
|
devel/ace+tao |
IGNORE: is marked as broken: Does not compile on FreeBSD >= 7.0 |
|
devel/adabindx |
(unknown) |
|
devel/agide |
IGNORE: is marked as broken: does not build |
|
devel/ald |
IGNORE: is only for i386, while you are running amd64 |
|
devel/arm-elf-gcc295 |
IGNORE: is only for i386, while you are running amd64 |
|
devel/aros-sdk |
IGNORE: is only for i386, while you are running amd64 (reason: should work with a cross compiler, needs testing) |
|
devel/asis |
IGNORE: is marked as broken: Does not build after gpl 2009 update to lang/gnat |
|
devel/asmutils |
IGNORE: is only for i386, while you are running amd64 |
|
devel/callgrind |
IGNORE: is only for i386, while you are running amd64 |
|
devel/cocktail |
error: coredump |
|
devel/cross-gcc |
IGNORE: you should select ARCH and ABI to build port |
|
devel/cross-gdb |
IGNORE: you should define TGTARCH and TGTABI to build port |
|
devel/ecos-tools |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
devel/florist |
IGNORE: is marked as broken: Does not build after gpl 2009 update to lang/gnat |
|
devel/gdb53 |
IGNORE: is only for i386 alpha sparc64, while you are running amd64 |
|
devel/gdb53-act |
IGNORE: is marked as broken: Does not compile on !i386 and !alpha |
|
devel/gnustep |
NO_PACKAGE: GPL3 |
|
devel/hp48xgcc |
IGNORE: is marked as broken: Configure fails on !i386 |
|
devel/i386-rtems-gcc |
IGNORE: is marked as broken: Does not link |
|
devel/jakarta-commons-daemon |
IGNORE: is marked as broken: Does not configure |
|
devel/jsl |
IGNORE: is only for i386, while you are running amd64 |
|
devel/jtag |
IGNORE: is only for i386, while you are running amd64 |
|
devel/jude-community |
IGNORE: is restricted: See http://jude.change-vision.com/jude-web/notes/ProductLicenseAgreement.html |
|
devel/kdesvn |
IGNORE: is marked as broken: Leaves files behind when deinstalled on amd64 |
|
devel/libcoro |
IGNORE: is only for i386, while you are running amd64 |
|
devel/libhoard |
IGNORE: is only for i386, while you are running amd64 |
|
devel/libmatheval |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
devel/libmpcbdm |
IGNORE: is only for i386, while you are running amd64 |
|
devel/libpeak |
IGNORE: is only for i386, while you are running amd64 |
|
devel/lightning |
IGNORE: is only for i386 sparc64 powerpc, while you are running amd64 |
|
devel/linux-f10-allegro |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
devel/linux-f10-dbus-glib |
IGNORE: bsd.linux-apps.mk test failed: The component dbuslibs is not defined for LINUX_DIST_SUFFIX= (the corresponding variable dbuslibs_FILE is not defined). This usually means that the current port should be used with non default linux base and/or infrastructure port(s) |
|
devel/linux-f10-dbus-libs |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
devel/linux-f10-libglade |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
devel/linux-f10-libglade2 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
devel/linux-f10-libsigc++20 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
devel/linux-f10-nspr |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
devel/linux-f10-sdl12 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
devel/linux-f8-allegro |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
devel/linux-f8-libglade |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
devel/linux-f8-libglade2 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
devel/linux-f8-libsigc++20 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
devel/linux-f8-nspr |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
devel/linux-f8-sdl12 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
devel/linux-runrev |
IGNORE: is only for i386, while you are running amd64 |
|
devel/linuxthreads |
IGNORE: is only for i386, while you are running amd64 |
|
devel/m6811-binutils |
IGNORE: does not run on amd64, while you are running amd64 |
|
devel/mob |
IGNORE: is marked as broken: 'Configure fails on amd64 or ia64' |
|
devel/msp430-gdb |
IGNORE: is marked as broken: Configure fails on amd64 and ia64 |
|
devel/omniNotify |
IGNORE: is marked as broken: 'Does not compile on !i386' |
|
devel/p5-FreeBSD-i386-Ptrace |
IGNORE: is only for i386, while you are running amd64 |
|
devel/p5-ORBit |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
devel/p5-SNMP-Persist |
IGNORE: must be built with a threaded Perl |
|
devel/papi |
IGNORE: needs hwmpc module loaded or compiled into the kernel. Please consult hwpmc(4) on how to do it (or cat pkg-message) |
|
devel/pear-PHPUnit |
IGNORE: has to be built manually: attempts to contact pear.phpunit.de during install phase |
|
devel/pear-XML_XPath |
IGNORE: cannot install: doesn't work with PHP version : 5 (Doesn't support PHP 5) |
|
devel/php5-phing |
IGNORE: has to be built manually: attempts to contact pear.phing.info during install phase |
|
devel/plan9port |
IGNORE: is only for i386, while you are running amd64 |
|
devel/pmake |
IGNORE: is restricted: 'Non-commercial use only' |
|
devel/poco |
IGNORE: is marked as broken: bad plist |
|
devel/py-ctypes |
IGNORE: ctypes ships with Python 2.5.x |
|
devel/py-psyco |
IGNORE: is only for i386, while you are running amd64 |
|
devel/py-ptrace |
IGNORE: is only for i386, while you are running amd64 |
|
devel/radrails |
IGNORE: is marked as broken: does not build |
|
devel/root |
IGNORE: is marked as broken: 'Does not compile' |
|
devel/ruby-avl |
IGNORE: is marked as broken: 'Does not build on amd64 (needs to link against shared libraries)' |
|
devel/ruby-rjudy |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
devel/ruby-subversion |
error: python |
|
devel/rubygem-rtags |
IGNORE: is marked as broken: does not install |
|
devel/simulavr |
IGNORE: is marked as broken: Does not compile |
|
devel/strace |
IGNORE: is only for i386, while you are running amd64 |
|
devel/thistest |
IGNORE: is restricted: Redistribution of pre-compiled binaries is not permitted |
|
devel/tide |
IGNORE: is only for i386, while you are running amd64 |
|
devel/titano |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
devel/ustl |
IGNORE: is marked as broken: Does not compile on !i386 |
|
devel/valgrind-snapshot |
IGNORE: is only for i386, while you are running amd64 |
|
devel/xfc |
IGNORE: is marked as broken: 'Does not compile on !i386' |
|
devel/xlslib |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
dns/fourcdns |
IGNORE: is only for i386, while you are running amd64 |
|
dns/gresolver |
IGNORE: needs a threaded Perl, install lang/perl5.8 with threads support and try again |
|
dns/linux-f8-libidn |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
editors/bed |
IGNORE: has a broken test for pthread_create() (wrong prototype and calling conventions) causing an infinite loop. |
|
editors/biew |
IGNORE: is marked as broken: Does not compile |
|
editors/e3 |
IGNORE: is only for i386, while you are running amd64 |
|
editors/edith |
IGNORE: is restricted: 'Redistribution not allowed' |
|
editors/fpc-ide |
IGNORE: is only for i386, while you are running amd64 |
|
editors/openoffice.org-3-devel |
error: fetch |
|
editors/openoffice.org-vcltesttool |
IGNORE: has to be built manually: loops builds on pointyhat |
|
editors/p5-Padre |
IGNORE: needs a threaded Perl, build with WITH_THREADS=yes flag and try again |
|
editors/qemacs |
IGNORE: crashes on startup |
|
editors/setedit |
IGNORE: is marked as broken: Does not compile |
|
editors/softmaker-office |
IGNORE: is only for i386, while you are running amd64 |
|
editors/staroffice5 |
IGNORE: is an interactive port |
|
editors/staroffice52 |
IGNORE: is an interactive port |
|
editors/staroffice60 |
IGNORE: is an interactive port |
|
editors/staroffice70 |
IGNORE: is an interactive port |
|
editors/xml2rfc-xxe |
IGNORE: is marked as broken: does not compile |
|
editors/zed |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
emulators/cpmemu |
IGNORE: is only for i386, while you are running amd64 |
|
emulators/cygne-sdl |
IGNORE: is only for i386, while you are running amd64 |
|
emulators/doscmd |
IGNORE: is only for i386, while you are running amd64 |
|
emulators/gens |
IGNORE: is only for i386, while you are running amd64 |
|
emulators/ines |
IGNORE: is only for i386, while you are running amd64 (reason: is an i386 binary) |
|
emulators/its |
IGNORE: is only for i386, while you are running amd64 |
|
emulators/linux-geepee32 |
IGNORE: is only for i386, while you are running amd64 |
|
emulators/linux-systemsimcell |
IGNORE: is restricted: Redistribution of pre-compiled binaries is not permitted |
|
emulators/linux-vmware-toolbox2 |
IGNORE: is restricted: 'Not sure if we can redistribute this.' |
|
emulators/linux-vmware-toolbox4 |
IGNORE: is restricted: 'Not sure if we can redistribute this.' |
|
emulators/linux-vmware-toolbox5 |
IGNORE: is restricted: 'Not sure if we can redistribute this.' |
|
emulators/linux-vmware-toolbox6 |
IGNORE: is restricted: 'Not sure if we can redistribute this.' |
|
emulators/mastergear |
IGNORE: is only for i386, while you are running amd64 |
|
emulators/osmose |
IGNORE: is only for i386, while you are running amd64 (reason: uses i386 assembly code) |
|
emulators/raine |
IGNORE: is only for i386, while you are running amd64 |
|
emulators/ski |
IGNORE: is restricted: License restrictions disallow automatic downloads and redistribution of the software. |
|
emulators/skyeye |
IGNORE: is only for i386, while you are running amd64 |
|
emulators/snes9express |
IGNORE: is marked as broken: Does not compile |
|
emulators/snespp |
NO_PACKAGE: this port should be recompiled for a particular FreeBSD kernel |
|
emulators/stonx |
IGNORE: is restricted: tos.img is copyrighted |
|
emulators/tuxnes |
IGNORE: is only for i386, while you are running amd64 (reason: uses i386 assembly code) |
|
emulators/twin |
IGNORE: is only for i386 alpha powerpc, while you are running amd64 |
|
emulators/vgba-bin |
IGNORE: is only for i386, while you are running amd64 |
|
emulators/vmw |
IGNORE: is only for i386, while you are running amd64 |
|
emulators/vmware-tools3 |
IGNORE: is restricted: 'Not sure if we can redistribute this.' |
|
emulators/vmware-tools4 |
IGNORE: is restricted: 'Not sure if we can redistribute this.' |
|
emulators/vmware-tools5 |
IGNORE: is restricted: 'Not sure if we can redistribute this.' |
|
emulators/vmware-tools6 |
IGNORE: is restricted: 'Not sure if we can redistribute this.' |
|
emulators/vmware3 |
IGNORE: is restricted: Not sure if we can redistribute it |
|
emulators/win4bsd |
IGNORE: is restricted: Redistribution is not allowed |
|
emulators/zsnes |
IGNORE: is only for i386, while you are running amd64 (reason: non-portable, for a portable emulator see emulators/snes9x) |
|
finance/gnucash |
(unknown) |
|
french/staroffice52 |
IGNORE: is an interactive port |
|
ftp/ftp-proxy |
IGNORE: is a part of base for 7.0 and above |
|
ftp/linux-f10-curl |
IGNORE: bsd.linux-apps.mk test failed: The component openldap is not defined for LINUX_DIST_SUFFIX= (the corresponding variable openldap_FILE is not defined). This usually means that the current port should be used with non default linux base and/or infrastructure port(s) |
|
ftp/linux-f8-curl |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
ftp/proftpd-devel |
IGNORE: Please use ftp/proftpd |
|
ftp/weex |
IGNORE: does not run on amd64, while you are running amd64 |
|
games/8kingdoms |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
games/HeroesOfMightAndMagic |
IGNORE: is an interactive port |
|
games/abridge |
IGNORE: is marked as broken: Does not compile on !i386 |
|
games/adom |
IGNORE: is only for i386, while you are running amd64 |
|
games/aestats |
IGNORE: is only for i386, while you are running amd64 |
|
games/antrix |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
games/aqbubble |
IGNORE: is marked as broken: Broken with gcc 4.2 |
|
games/atitd |
IGNORE: is only for i386, while you are running amd64 |
|
games/battleball |
IGNORE: is marked as broken: Does not compile |
|
games/crafty-open-enormous |
IGNORE: is marked as broken: dumps core during build |
|
games/crafty-tablebase-no-pawn |
NO_PACKAGE: Way too big |
|
games/crafty-tablebase-pawn |
NO_PACKAGE: Way too big |
|
games/d2x-xl |
error: fetch |
|
games/digger-vgl |
IGNORE: is only for i386, while you are running amd64 |
|
games/doom |
IGNORE: is only for i386, while you are running amd64 |
|
games/flightgear-aircrafts |
IGNORE: has to be built manually: package exceeds pointyhat filesize limit |
|
games/grubinvaders |
IGNORE: is only for i386, while you are running amd64 |
|
games/hedgewars |
IGNORE: is only for i386, while you are running amd64 (reason: depends on fpc which is only available for i386) |
|
games/hohlin |
IGNORE: is only for i386, while you are running amd64 |
|
games/jaggedalliance2 |
IGNORE: no language has been chosen. Please choose the appropriate language for your game CD |
|
games/jfduke3d |
IGNORE: is only for i386, while you are running amd64 (reason: uses x86 assembly code) |
|
games/kaid |
NO_PACKAGE: contains compile time path info, ignores cc cxx |
|
games/laughingman |
error: linker_error |
|
games/linux-americasarmy |
IGNORE: is restricted: Redistribution is limited, see license |
|
games/linux-candycruncher-demo |
IGNORE: is only for i386, while you are running amd64 |
|
games/linux-coldwar-demo |
IGNORE: is only for i386, while you are running amd64 |
|
games/linux-darwinia-demo |
IGNORE: is only for i386, while you are running amd64 |
|
games/linux-defcon |
IGNORE: is only for i386, while you are running amd64 |
|
games/linux-doom3-demo |
NO_PACKAGE: Distfile size is 462MB, set FORCE_PACKAGE if you really want to build this package |
|
games/linux-enemyterritory-fortress |
IGNORE: is restricted: Redistribution is limited, see license |
|
games/linux-enemyterritory-tce |
IGNORE: is restricted: Redistribution is limited, see license |
|
games/linux-etqw-demo-server |
NO_PACKAGE: Package will be 428MB, set FORCE_PACKAGE if you really want it |
|
games/linux-etqw-server |
NO_PACKAGE: Package will be 435MB, set FORCE_PACKAGE if you really want it |
|
games/linux-gorky17-demo |
IGNORE: is only for i386, while you are running amd64 |
|
games/linux-hdb-demo |
IGNORE: is only for i386, while you are running amd64 |
|
games/linux-ningpo-demo |
IGNORE: is only for i386, while you are running amd64 |
|
games/linux-nwnclient |
IGNORE: is only for i386, while you are running amd64 |
|
games/linux-nwserver |
IGNORE: is only for i386, while you are running amd64 |
|
games/linux-quake4 |
NO_PACKAGE: Package will be 280MB, set FORCE_PACKAGE if you really want it |
|
games/linux-quake4-demo |
NO_PACKAGE: Package will be 337MB, set FORCE_PACKAGE if you really want it |
|
games/linux-savage |
IGNORE: is restricted: Savage is freeware, but i am not sure of its license |
|
games/linux-savage-samuraiwars |
IGNORE: is restricted: SamuraiWars is freeware, but i am not sure of its license |
|
games/linux-sof |
IGNORE: is restricted: Redistribution is limited, see license |
|
games/linux-ssamtfe |
IGNORE: is restricted: Redistribution is limited, see license |
|
games/linux-ssamtse |
IGNORE: is restricted: Redistribution is limited, see license |
|
games/linux-steam |
IGNORE: is an interactive port |
|
games/linux-unrealgold |
IGNORE: is restricted: Redistribution is limited, see license |
|
games/linux-uplink-demo |
IGNORE: is only for i386, while you are running amd64 |
|
games/linux-ut2003-demo |
IGNORE: is restricted: Redistribution is limited, see license |
|
games/linux-ut2004-demo |
IGNORE: is restricted: Redistribution is limited, see license |
|
games/linux-virtual-jay-peak |
IGNORE: is only for i386, while you are running amd64 |
|
games/linux-warsow |
IGNORE: is outdated, does not match games/warsow-data port |
|
games/lmpc |
IGNORE: assumes sizeof(long) == 4 |
|
games/magiccube4d |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
games/nexuiz |
NO_PACKAGE: Package will be 724MB, set FORCE_PACKAGE if you really want to build it |
|
games/q3cellshading |
IGNORE: is only for i386, while you are running amd64 (reason: does not run properly; try games/ioquake3 with option) |
|
games/quake3 |
IGNORE: is only for i386, while you are running amd64 (reason: does not run properly; try games/ioquake3) |
|
games/quake3-ra3 |
NO_PACKAGE: 'Package will be 102MB, set FORCE_PACKAGE if you really want to build it' |
|
games/quake3-rq3 |
NO_PACKAGE: Package will be 487MB, set FORCE_PACKAGE |
|
games/quake3-ut |
NO_PACKAGE: 'Distfile is \>256MB\; define FORCE_PACKAGE if you really want this.' |
|
games/quake3-wfa |
NO_PACKAGE: 'Package will be 138MB, set FORCE_PACKAGE if you really want to build it' |
|
games/spicetrade |
NO_PACKAGE: Package will be 186MB, set FORCE_PACKAGE if you really want to build it |
|
games/stvef-paks |
IGNORE: is only for i386, while you are running amd64 |
|
games/vavoom-extras |
NO_PACKAGE: package will be 665MB; set FORCE_PACKAGE if you really want it |
|
games/worldofpadman |
NO_PACKAGE: package will be ~600MB; set FORCE_PACKAGE if you really want it |
|
games/xbloody |
IGNORE: is marked as broken: 'Does not compile on !i386' |
|
games/xinvaders |
IGNORE: is only for i386, while you are running amd64 |
|
games/xpipeman |
IGNORE: is only for i386, while you are running amd64 |
|
german/citrix_xenapp |
IGNORE: is an interactive port |
|
german/staroffice5 |
IGNORE: is an interactive port |
|
german/staroffice52 |
IGNORE: is an interactive port |
|
german/staroffice70 |
IGNORE: is an interactive port |
|
german/unix-connect |
IGNORE: has to be built manually: needs hostname |
|
graphics/acidwarp |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/bugle |
IGNORE: is marked as broken: does not compile |
|
graphics/compupic |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/cqcam |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/ffff |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/g3dviewer |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
graphics/geomview |
IGNORE: does not run on amd64, while you are running amd64 (reason: Segfaults on amd64) |
|
graphics/gephex |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/gimp-gap |
IGNORE: does not work with Gimp 2.6, and no update available |
|
graphics/glide3 |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/gmt |
IGNORE: is marked as broken: 'Does not compile on !i386' |
|
graphics/gnash-devel |
IGNORE: please use graphics/gnash instead, it is currently newer |
|
graphics/inventor |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/irit |
IGNORE: is marked as broken: checksum mismatch |
|
graphics/ivtools |
IGNORE: is marked as broken: incomplete pkg-plist |
|
graphics/libvisual-plugins |
IGNORE: is marked as broken: Broken objformat handling |
|
graphics/linplasma |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/linux-XnViewMP |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/linux-f10-cairo |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f10-dri |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f10-gdk-pixbuf |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f10-imlib |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f10-jpeg |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f10-libmng |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f10-png |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f10-png10 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f10-sdl_image |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f10-tiff |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f10-ungif |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f8-cairo |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f8-dri |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f8-gdk-pixbuf |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f8-imlib |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f8-jpeg |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f8-libGLU |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f8-libmng |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f8-png |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f8-png10 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f8-sdl_image |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f8-tiff |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux-f8-ungif |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
graphics/linux_dri-devel |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/linux_glide |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/openrm |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/php4-ffmpeg |
IGNORE: is marked as broken: does not compile with ffmpeg 0.5 and later |
|
graphics/picturebook |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/pixie |
IGNORE: does not run on amd64, while you are running amd64 |
|
graphics/pixieplus |
IGNORE: is marked as broken: does not compile |
|
graphics/plasma-kmod |
IGNORE: is marked as broken: Does not configure |
|
graphics/ppmcaption |
IGNORE: is only for i386, while you are running amd64 (reason: does not compile on ia64 or amd64) |
|
graphics/py-cgkit |
IGNORE: is marked as broken: does not compile |
|
graphics/py-poppler |
(unknown) |
|
graphics/qcread |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/ray++ |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
graphics/ruby-tgif |
IGNORE: is marked as broken: Does not build on amd64 or ia64 (missing -fPIC) |
|
graphics/s3switch |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/skencil |
IGNORE: needs Python 2.4 as default on pointyhat/TB |
|
graphics/uDrawGraph |
IGNORE: is restricted: 'binary under GNU LGPL without accompanying source' |
|
graphics/wings |
IGNORE: is marked as broken: Broken with erlang-r13b |
|
graphics/xaralx |
NO_PACKAGE: yes |
|
graphics/xaralx-devel |
NO_PACKAGE: yes |
|
graphics/xmfract |
IGNORE: fails to run with: XCreateImage failed |
|
graphics/xmrm |
IGNORE: is marked as broken: Does not compile on amd64 or sparc64 |
|
graphics/xnview |
IGNORE: is only for i386, while you are running amd64 |
|
graphics/zgv |
IGNORE: is only for i386, while you are running amd64 |
|
hebrew/geresh |
(unknown) |
|
irc/darkbot |
IGNORE: is an interactive port |
|
irc/evangeline |
IGNORE: is an interactive port |
|
irc/irssi-xmpp |
IGNORE: Does not work with irc/irssi-0.8.12 |
|
irc/psybnc |
IGNORE: is an interactive port |
|
japanese/Wnn6 |
IGNORE: is an interactive port |
|
japanese/citrix_xenapp |
IGNORE: is an interactive port |
|
japanese/eijiro-fpw |
IGNORE: has to be built manually: Needs data from CDROM |
|
japanese/expect |
IGNORE: is marked as broken: Incomplete pkg-plist |
|
japanese/flex-sdk |
IGNORE: is restricted: Need agreement before download |
|
japanese/iiimf-le-canna |
IGNORE: is only for i386, while you are running amd64 |
|
japanese/iiimf-le-freewnn |
IGNORE: is only for i386, while you are running amd64 |
|
japanese/jmode |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
japanese/jmode-skk |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
japanese/kon2-14dot |
IGNORE: is only for i386, while you are running amd64 |
|
japanese/kon2-16dot |
IGNORE: is only for i386, while you are running amd64 |
|
japanese/mypaedia-fpw |
IGNORE: is an interactive port |
|
japanese/ne |
IGNORE: is marked as broken: Does not compile on amd64 |
|
japanese/okphone |
IGNORE: is marked as broken: Broken with gcc 4.2 |
|
japanese/oleo |
IGNORE: is marked as broken: Broken with gcc 4.2 |
|
japanese/otojiro-fpw |
IGNORE: has to be built manually: Needs data from CDROM |
|
japanese/ruby-rdic |
IGNORE: does not run on amd64, while you are running amd64 |
|
japanese/srd-fpw |
IGNORE: is an interactive port |
|
japanese/tkstep80 |
IGNORE: is marked as broken: Broken with gcc 4.2 |
|
japanese/waeijiro-fpw |
IGNORE: has to be built manually: Needs data from a CDROM |
|
java/bluej |
IGNORE: is an interactive port |
|
java/cacao |
IGNORE: unsupported architecture |
|
java/eclipse-devel |
IGNORE: eclipse 3.4.x is now in java/eclipse, please use that instead |
|
java/jai-imageio |
IGNORE: is restricted: 'Redistribution is not permitted' |
|
java/jboss5 |
IGNORE: has to be built manually: fetches files in build phase |
|
java/jc |
IGNORE: is only for i386, while you are running amd64 |
|
java/jsdk |
IGNORE: is restricted: 'Sun has a funky license for this software; no commercial use' |
|
java/netbeans-devel |
IGNORE: No development version available right now. Please use java/netbeans instead. |
|
java/openjit |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
java/shujit |
IGNORE: is only for i386, while you are running amd64 |
|
java/simplicity |
IGNORE: is restricted: 'Restrictive license' |
|
java/tya |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
korean/iiimf-le-hangul |
IGNORE: is only for i386, while you are running amd64 |
|
lang/TenDRA |
IGNORE: is only for i386 alpha, while you are running amd64 |
|
lang/ccscript |
IGNORE: is marked as broken: Does not build with libtool 2.2. |
|
lang/compaq-cc |
IGNORE: is restricted: 'Distribution not allowed' |
|
lang/csharp-mode.el |
IGNORE: is marked as broken: does not fetch |
|
lang/drscheme |
IGNORE: signal 10 in mzscheme3m during build on pointyhat |
|
lang/dylan |
IGNORE: is marked as broken: does not install |
|
lang/ficl-devel |
IGNORE: is only for i386, while you are running amd64 |
|
lang/fpc-units |
IGNORE: is only for i386, while you are running amd64 |
|
lang/fpc-utils |
IGNORE: is only for i386, while you are running amd64 |
|
lang/gcc295 |
IGNORE: is only for alpha i386, while you are running amd64 |
|
lang/gcl |
IGNORE: is only for i386, while you are running amd64 |
|
lang/gforth |
IGNORE: is marked as broken: Does not compile |
|
lang/gnat-gcc42 |
IGNORE: is only for i386, while you are running amd64 |
|
lang/gnat-gcc43 |
IGNORE: is only for i386, while you are running amd64 |
|
lang/gnustep-objc |
IGNORE: does not run on ia64 amd64, while you are running amd64 |
|
lang/gprolog |
IGNORE: is only for i386, while you are running amd64 |
|
lang/harbour |
IGNORE: is marked as broken: Leaves files behind on deinstall |
|
lang/hla |
IGNORE: is only for i386, while you are running amd64 |
|
lang/icc |
IGNORE: is restricted: Intel forbids any redistribution |
|
lang/icc7 |
IGNORE: is restricted: Intel forbids any redistribution |
|
lang/ifc |
IGNORE: is restricted: 'Intel forbids any redistribution' |
|
lang/ifc7 |
IGNORE: is restricted: Intel forbids any redistribution |
|
lang/ikarus |
IGNORE: is only for i386, while you are running amd64 |
|
lang/kroc |
IGNORE: is only for i386, while you are running amd64 |
|
lang/linux-f10-libg2c |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
lang/linux-f10-tcl85 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
lang/linux-f8-libg2c |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
lang/linux-f8-tcl84 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
lang/linux-j |
IGNORE: is only for i386, while you are running amd64 |
|
lang/mit-scheme |
IGNORE: is only for i386, while you are running amd64 |
|
lang/mlton |
IGNORE: is marked as broken: does not build |
|
lang/mosh |
IGNORE: is only for i386, while you are running amd64 |
|
lang/mozart |
IGNORE: is marked as broken: Does not compile on !i386 |
|
lang/mpd |
IGNORE: is only for alpha i386, while you are running amd64 (reason: uses assembly code for the target machine) |
|
lang/nhc98 |
IGNORE: is only for i386, while you are running amd64 |
|
lang/nml |
IGNORE: is only for i386, while you are running amd64 |
|
lang/ocs |
IGNORE: does not run on amd64 ia64 sparc64, while you are running amd64 |
|
lang/oo2c |
IGNORE: is only for i386, while you are running amd64 |
|
lang/oorexx |
IGNORE: is marked as broken: Does not compile on !i386 |
|
lang/parrot |
IGNORE: needs to be build under non-root user, pointyhat cannot do that |
|
lang/pcc |
IGNORE: is only for i386, while you are running amd64 |
|
lang/petite-chez |
IGNORE: is only for i386, while you are running amd64 |
|
lang/pnetc |
IGNORE: is marked as broken: does not build |
|
lang/py-prolog |
IGNORE: is marked as broken: 'Does not build on ia64 or amd64 (can't link shared libraries to static)' |
|
lang/python-doc-postscript-a4 |
(unknown) |
|
lang/python-doc-postscript-letter |
(unknown) |
|
lang/qscheme |
IGNORE: is marked as broken: Does not build on amd64 or ia64 |
|
lang/rscheme |
IGNORE: is marked as broken: fails to install on amd64 |
|
lang/schemetoc |
IGNORE: is only for i386, while you are running amd64 |
|
lang/scriba |
IGNORE: is marked as broken: Does not install |
|
lang/smarteiffel |
IGNORE: is marked as broken: Does not install |
|
lang/sr |
IGNORE: is marked as broken: 'Does not compile on !i386 and !alpha' |
|
lang/tcc |
port has been moved: (deleted per /usr/ports/MOVED) |
|
lang/visualworks |
IGNORE: is restricted: Redistribution is probably not permitted |
|
lang/xds |
IGNORE: is restricted: Excelsior forbids any redistribution |
|
lang/xds-c |
IGNORE: is restricted: Excelsior forbids any redistribution |
|
lang/xsb |
IGNORE: is marked as broken: 'Does not compile on !i386 and !sparc64' |
|
mail/ecartis |
IGNORE: is an interactive port |
|
mail/elm |
IGNORE: is an interactive port |
|
mail/exim-ldap2 |
IGNORE: cannot install: unknown OpenLDAP version: auto |
|
mail/gmime2-sharp |
IGNORE: try to install weaked-named assembly into the GAC. |
|
mail/libnewmail |
error: configure_error |
|
mail/listmanager |
IGNORE: is only for i386, while you are running amd64 |
|
mail/mahogany |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
mail/mailagent |
IGNORE: is an interactive port |
|
mail/majorcool |
IGNORE: is an interactive port |
|
mail/meta1 |
IGNORE: has to be built manually: needs hostname |
|
mail/p5-Sendmail-Milter |
IGNORE: requires an existing installation of perl, built with -DWITH_THREADS |
|
mail/qmail-scanner1 |
IGNORE: has to be built manually: Requires qmail built with non-standard setting |
|
mail/qmail-vida |
IGNORE: is restricted: 'djb\'s packaging license does not allow non-standard qmail binary distributions' |
|
mail/smtpfeed |
NO_PACKAGE: 'complex configuration for sendmail.cf needed' |
|
mail/xpbiff |
IGNORE: is marked as broken: Does not compile on !i386 |
|
math/atlas |
IGNORE: has to be built manually: Optimizes for the local machine. |
|
math/atlas-devel |
IGNORE: has to be built manually: Optimizes for the local machine. |
|
math/dislin |
IGNORE: is restricted: free for non-commercial use. |
|
math/fftw3-long |
IGNORE: is only for i386 sparc64, while you are running amd64 |
|
math/freemat |
IGNORE: is marked as broken: does not compile |
|
math/freemat-mpi |
IGNORE: is marked as broken: does not compile |
|
math/gotoblas |
IGNORE: has to be built manually: Please obtain the source code manyally from http://www.tacc.utexas.edu/resources/software/ |
|
math/javanns |
IGNORE: is only for i386, while you are running amd64 |
|
math/kaskade |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
math/libjbigi |
IGNORE: is marked as broken: doesn't build: relocation R_X86_64_32 can not be used when making a shared object; recompile with -fPIC |
|
math/linalg |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
math/linux-SHA-1_collision_search_graz |
IGNORE: is only for i386, while you are running amd64 |
|
math/linux-relview |
IGNORE: is only for i386, while you are running amd64 |
|
math/matrix |
IGNORE: is marked as broken: 'Does not build on amd64 (shared libraries must be compiled with -fPIC)' |
|
math/mprime |
IGNORE: is only for i386, while you are running amd64 |
|
math/mupad |
IGNORE: is only for i386, while you are running amd64 |
|
math/octave-forge-ann |
(unknown) |
|
math/octave-forge-fixed |
(unknown) |
|
math/octave-forge-ftp |
(unknown) |
|
math/octave-forge-graceplot |
(unknown) |
|
math/octave-forge-parallel |
(unknown) |
|
math/octave-forge-triangular |
(unknown) |
|
math/octave-forge-vrml |
(unknown) |
|
math/rascal |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
math/rpy |
error: install_error |
|
math/superlu_mt |
IGNORE: is marked as broken: checksum mismatch |
|
math/wingz |
IGNORE: is only for i386, while you are running amd64 |
|
math/wingz3 |
NO_PACKAGE: 'nothing to build. commercial software' |
|
math/yacas |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
misc/amfm |
IGNORE: is marked as broken: does not build |
|
misc/bsdiff |
IGNORE: is now contained in the base system |
|
misc/compat7x |
(unknown) |
|
misc/ftree |
IGNORE: is restricted: Non-commercial use only |
|
misc/gkx86info |
IGNORE: is only for i386, while you are running amd64 |
|
misc/gkx86info2 |
IGNORE: is only for i386, while you are running amd64 |
|
misc/gtl |
IGNORE: is restricted: License forbids redistribution (source or binary) |
|
misc/ldconfig_compat |
IGNORE: isn't needed (part of base rc.d) |
|
misc/posixtestsuite |
NO_PACKAGE: 'Nothing to package' |
|
misc/proxyper |
IGNORE: is only for i386, while you are running amd64 |
|
misc/py-distutils |
IGNORE: won't work with the installed Python: use the version distributed with python2.5 |
|
misc/susv2 |
IGNORE: is restricted: 'Redistribution of the documents is not permitted' |
|
misc/susv3 |
IGNORE: is restricted: 'Redistribution of the documents is not permitted' |
|
misc/tet |
NO_PACKAGE: ${TET_ROOT} needs to be set at compile time. |
|
misc/translator |
IGNORE: needs threaded perl |
|
misc/usbrh-libusb |
IGNORE: is marked as broken: does not build |
|
misc/wanpipe |
NO_PACKAGE: Should be in sync with the kernel to work correctly |
|
misc/window |
IGNORE: window-1.0 is still part of the base system |
|
misc/zoneinfo |
NO_PACKAGE: Overwrites files in the base system |
|
multimedia/bsdbktr_tvtune |
IGNORE: is only for alpha i386, while you are running amd64 |
|
multimedia/camserv |
IGNORE: is only for i386 alpha, while you are running amd64 |
|
multimedia/gcfilms |
IGNORE: is an interactive port |
|
multimedia/handbrake |
IGNORE: is only for i386, while you are running amd64 |
|
multimedia/jahshaka |
IGNORE: is marked as broken: does not compile with GCC 4.2 |
|
multimedia/linux-divx4linux4 |
IGNORE: is restricted: unsure of licensing issues |
|
multimedia/linux-f10-libtheora |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
multimedia/linux-f8-libtheora |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
multimedia/linux-gspca-kmod |
NO_PACKAGE: depends on kernel sources |
|
multimedia/linux-ov511-kmod |
NO_PACKAGE: depends on kernel sources |
|
multimedia/linux-xmovie |
IGNORE: is only for i386, while you are running amd64 |
|
multimedia/motion |
error: fetch |
|
multimedia/mplayerxp |
IGNORE: is only for i386, while you are running amd64 |
|
multimedia/netshow |
IGNORE: is restricted: 'Commercial software' |
|
multimedia/nmm |
IGNORE: is marked as broken: ihppimpl segfaults during build |
|
multimedia/phonon-gstreamer |
IGNORE: superseded by multimedia/qt4-phonon-gst |
|
multimedia/pvr250 |
IGNORE: is restricted: 'This port uses a binary driver which is owned by Hauppauge' |
|
multimedia/pvrxxx |
IGNORE: is restricted: This port uses a binary driver which is owned by Hauppauge |
|
multimedia/pwcbsd |
IGNORE: requires kernel source files |
|
multimedia/sabbu |
IGNORE: is marked as broken: does not compile with ffmpeg 0.5 and later |
|
multimedia/spigot |
IGNORE: is only for i386, while you are running amd64 |
|
multimedia/tosvcd |
IGNORE: is only for i386, while you are running amd64 |
|
multimedia/tv_grab_au |
IGNORE: is marked as broken: does not fetch |
|
multimedia/vcdtools |
IGNORE: is only for i386, while you are running amd64 |
|
multimedia/vtkmpeg2encode |
NO_PACKAGE: the MPEG2 format and all software that uses it is subject to patent restrictions |
|
multimedia/xmms-avi |
IGNORE: is only for i386, while you are running amd64 |
|
multimedia/xmps-win32-plugin |
IGNORE: is marked as broken: Does not compile |
|
net-im/gtkyahoo |
IGNORE: is only for i386, while you are running amd64 |
|
net-im/gyach |
IGNORE: is marked as broken: 'Does not compile on !i386' |
|
net-im/iserverd |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
net-im/libjingle |
IGNORE: is marked as broken: does not compile |
|
net-im/linux-ymessenger |
IGNORE: is only for i386, while you are running amd64 |
|
net-im/pidgin-sipe |
(unknown) |
|
net-mgmt/bsd-airtools |
IGNORE: broken by removal of wicontrol ioctls from if_wavelan_ieee.h |
|
net-mgmt/flowscan |
IGNORE: is marked as broken: does not build |
|
net-mgmt/lanmap |
(unknown) |
|
net-mgmt/netams |
IGNORE: is marked as broken: does not compile |
|
net-mgmt/netxms |
NO_PACKAGE: yes |
|
net-mgmt/nfsen |
IGNORE: needs running syslogd |
|
net-mgmt/ng_ipacct |
IGNORE: 'Depends on kernel' |
|
net-mgmt/nocol |
IGNORE: is an interactive port |
|
net-mgmt/ocsinventory-agent |
IGNORE: is an interactive port |
|
net-mgmt/openvmps |
IGNORE: does not run correctly on amd64 architecture, see ports/136376 |
|
net-mgmt/send |
IGNORE: is restricted: not redistributable, license agreement required |
|
net-p2p/linux-edonkey-server |
IGNORE: is only for i386, while you are running amd64 |
|
net-p2p/linux-edonkey-tool-recovermet |
IGNORE: is only for i386, while you are running amd64 |
|
net-p2p/linux-jigdo |
IGNORE: is only for i386, while you are running amd64 |
|
net-p2p/mute-net |
IGNORE: Unknown version of GCC specified (USE_GCC=3.3) |
|
net-p2p/mute-net-gui |
IGNORE: Unknown version of GCC specified (USE_GCC=3.3) |
|
net-p2p/mute-net-text |
IGNORE: Unknown version of GCC specified (USE_GCC=3.3) |
|
net-p2p/torrentflux |
NO_PACKAGE: dependencies need manual installation, see /home/pcvs/ports/net-p2p/torrentflux/files/install.txt.in |
|
net/acx100 |
IGNORE: requires the kernel sources to be available |
|
net/asterisk-bristuff |
IGNORE: is marked as broken: current does not build |
|
net/asterisk12-addons |
IGNORE: is marked as broken: does not build |
|
net/astmanproxy |
IGNORE: is marked as broken: does not fetch |
|
net/b2bua |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
net/beacon |
IGNORE: is marked as broken: Does not compile on !i386 |
|
net/bpfstat |
IGNORE: this has been merged into netstat |
|
net/bwi-firmware-kmod |
NO_PACKAGE: this is a modified version of a restricted firmware |
|
net/cap |
IGNORE: is marked as broken: Broken with gcc 4.2 |
|
net/citrix_ica |
IGNORE: is an interactive port |
|
net/citrix_xenapp |
IGNORE: is an interactive port |
|
net/cnet |
IGNORE: is marked as broken: Does not compile on amd64 or ia64 |
|
net/csup |
IGNORE: is already in the base system |
|
net/csync2 |
(unknown) |
|
net/cvsup-mirror |
IGNORE: is an interactive port |
|
net/delegate |
IGNORE: is an interactive port |
|
net/dhcperf |
IGNORE: is only for i386, while you are running amd64 (reason: Rebuild of i386 package provided by Nominum.) |
|
net/dimes |
NO_PACKAGE: There is the string in properties.xml which system-depends |
|
net/etherboot |
IGNORE: is only for i386, while you are running amd64 |
|
net/freebsd-tftp |
NO_PACKAGE: Installs software in /usr/libexec and /usr/bin |
|
net/generic-nqs |
IGNORE: is an interactive port |
|
net/ggsd |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
net/gtic |
IGNORE: is marked as broken: 'Does not compile on !i386 and !alpha' |
|
net/hawknl-devel |
IGNORE: is marked as broken: does not compile on amd64 |
|
net/ipa_ip6fw |
IGNORE: not supported on your system, as it does not have IPv6 ipfw firewall |
|
net/ipa_ipfw |
NO_PACKAGE: Needs to be built uniquely for each host |
|
net/ipv6socket_scrub |
IGNORE: is restricted: not redistributable, license agreement required |
|
net/ipw-firmware |
IGNORE: is now obsolete, install net/ipw-firmware-kmod instead |
|
net/ipw-firmware-kmod |
IGNORE: is already included in base system |
|
net/iwi-firmware |
IGNORE: is configured with iwicontrol(8) which you don't need, use 'make rmconfig' and uncheck CONTROL |
|
net/iwi-firmware-kmod |
IGNORE: is already included in base system |
|
net/linux-f10-openldap |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
net/mgen |
IGNORE: is only for i386, while you are running amd64 |
|
net/mknbi |
IGNORE: is only for i386, while you are running amd64 |
|
net/mpd-l2tp-ipv6pd-client |
IGNORE: has to be built manually: yes |
|
net/ncplib |
IGNORE: is only for i386, while you are running amd64 |
|
net/ng_car |
IGNORE: already exists in base system |
|
net/nocatauth-gateway |
IGNORE: uses a UID registered to another port |
|
net/nocatauth-server |
IGNORE: uses a UID registered to another port |
|
net/openser |
IGNORE: is only for i386, while you are running amd64 |
|
net/p5-Parallel-Pvm |
IGNORE: does not run on amd64 ia64, while you are running amd64 |
|
net/pathchar |
IGNORE: is only for i386, while you are running amd64 |
|
net/py-libnet |
IGNORE: is marked as broken: Does not compile on amd64 (tries to link non-PIC libnet.a into PIC shared library) |
|
net/pypvm |
IGNORE: is marked as broken: 'pvm port needs to provide shared libraries' |
|
net/radiator |
IGNORE: is restricted: 'Commercial software' |
|
net/relay |
IGNORE: is an interactive port |
|
net/rubygem-twitter |
IGNORE: is marked as broken: does not install, requires exact version of oauth |
|
net/skype-devel |
IGNORE: is restricted: Redistribution prohibited. |
|
net/skype12 |
IGNORE: is restricted: Redistribution prohibited. |
|
net/slirp |
IGNORE: is only for i386, while you are running amd64 |
|
net/tridiavnc |
IGNORE: is marked as broken: Does not compile on i386 |
|
net/urlendec |
IGNORE: is only for i386, while you are running amd64 |
|
net/vserver |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
net/warppipe |
IGNORE: is only for i386, while you are running amd64 |
|
net/wistumbler2 |
IGNORE: is not supported on FreeBSD 7.X and later |
|
net/ztelnet |
IGNORE: is restricted: 'zmodem code has restrictive copyright' |
|
news/dnews |
IGNORE: is an interactive port |
|
news/husky-bsopack |
IGNORE: is only for i386, while you are running amd64 |
|
news/husky-hpt |
IGNORE: is only for i386, while you are running amd64 |
|
news/husky-hpt-devel |
IGNORE: is only for i386, while you are running amd64 |
|
news/husky-hptkill |
IGNORE: is only for i386, while you are running amd64 |
|
news/husky-hptsqfix |
IGNORE: is only for i386, while you are running amd64 |
|
news/husky-hpucode |
IGNORE: is only for i386, while you are running amd64 |
|
news/husky-htick |
IGNORE: is only for i386, while you are running amd64 |
|
news/husky-htick-devel |
IGNORE: is only for i386, while you are running amd64 |
|
news/husky-msged |
IGNORE: is only for i386, while you are running amd64 |
|
news/husky-nltools |
IGNORE: is only for i386, while you are running amd64 |
|
news/husky-sqpack |
IGNORE: is only for i386, while you are running amd64 |
|
news/newsx |
IGNORE: a configured INN is required |
|
news/openftd |
IGNORE: is marked as broken: Does not install |
|
news/trn4 |
IGNORE: is an interactive port |
|
palm/iSiloXC |
IGNORE: is only for i386, while you are running amd64 |
|
palm/isilo |
IGNORE: is only for i386, while you are running amd64 |
|
palm/palmos-sdk |
IGNORE: is restricted: License agreement is required. |
|
palm/pose |
IGNORE: is marked as broken: Does not compile on !i386 |
|
palm/prc-tools |
IGNORE: is marked as broken: does not build |
|
palm/romeo |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
ports-mgmt/barry |
IGNORE: is marked as broken: Broken with gcc 4.2 |
|
ports-mgmt/vulnerability-test-port |
IGNORE: is disabled on package building systems |
|
portuguese/staroffice52 |
IGNORE: is an interactive port |
|
print/bjfilter360 |
IGNORE: is only for i386, while you are running amd64 |
|
print/bjfilter850 |
IGNORE: is only for i386, while you are running amd64 |
|
print/bjfilter850ug |
IGNORE: is only for i386, while you are running amd64 |
|
print/bjfilter860 |
IGNORE: is only for i386, while you are running amd64 |
|
print/bjfilter870 |
IGNORE: is only for i386, while you are running amd64 |
|
print/bjfilters600 |
IGNORE: is only for i386, while you are running amd64 |
|
print/bjfilters630 |
IGNORE: is only for i386, while you are running amd64 |
|
print/bjfilters6300 |
IGNORE: is only for i386, while you are running amd64 |
|
print/dvips |
IGNORE: is an interactive port |
|
print/kaspaliste |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
print/kpdftool |
(unknown) |
|
print/latex-msc |
IGNORE: is marked as broken: checksum mismatch |
|
print/pdftk |
IGNORE: does not run on amd64 ia64 sparc64, while you are running amd64 |
|
print/phppdflib |
IGNORE: cannot install: doesn't work with PHP version : 5 (Doesn't support PHP 5) |
|
print/pips-sc60s |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips-sc65_66s |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips-sc80s |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips-sc84_83s |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips-sc85_86s |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips-scx3500_3600s |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips-sp2100_2200 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips-spr200_210 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips-spr300_310 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips-spr800 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips2200 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips3000 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips3300 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips3500 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips4000 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips670 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips730 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips740 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips740-cups |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips750_2000 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips760 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips770 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips780 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips800 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips820 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips870 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips870-cups |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips880 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips900 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips930 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips940 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips970 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips970-cups |
IGNORE: is only for i386, while you are running amd64 |
|
print/pips980 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pipsg700 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pipsg800 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pipsg900 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pipsv500 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pipsv600 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pipsv700 |
IGNORE: is only for i386, while you are running amd64 |
|
print/pipsv700-cups |
IGNORE: is only for i386, while you are running amd64 |
|
russian/koi8r-ps |
NO_PACKAGE: Nothing to build, configurations only |
|
science/InsightToolkit |
NO_PACKAGE: License does not allow redistribution of binaries |
|
science/dtiquery |
IGNORE: is restricted: Must register to download at http://graphics.stanford.edu/projects/dti/ |
|
science/elmerpost |
IGNORE: is marked as broken: Does not compile on amd64 |
|
science/gamess |
IGNORE: has to be built manually: You must manually get the source distribution from master site. http://www.msg.ameslab.gov/GAMESS/download.html. Please selsect 'Source code distribution', and check on 'running on Intel compatible PC running Linux'. You must have license, and freely obtainable. |
|
science/ovt |
IGNORE: is restricted: yes |
|
science/pcp |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
science/pnetcdf |
IGNORE: is marked as broken: Does not configure |
|
science/vmd |
IGNORE: is restricted: 'License has restrictions' |
|
science/x11iraf |
IGNORE: is only for i386, while you are running amd64 |
|
science/xloops-ginac |
(unknown) |
|
security/bdc |
IGNORE: is restricted: License prohibits redistribution |
|
security/bsp_upektfmess |
IGNORE: is restricted: license prohibits redistribution |
|
security/chntpw |
IGNORE: is only for i386, while you are running amd64 |
|
security/find_ddos |
IGNORE: is only for i386, while you are running amd64 |
|
security/freebsd-update |
IGNORE: is now contained in the base system |
|
security/fwknop |
IGNORE: is an interactive port |
|
security/hunch |
IGNORE: is an interactive port |
|
security/idea |
IGNORE: is restricted: 'Crypto; IDEA is a patented algorithm that requires proper licensing' |
|
security/krb4 |
IGNORE: is marked as broken: Incorrect pkg-plist on FreeBSD >= 7.0 |
|
security/libparanoia |
IGNORE: is only for i386, while you are running amd64 |
|
security/linux-f10-cyrus-sasl2 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
security/linux-f10-libssh2 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
security/linux-f10-nss |
IGNORE: bsd.linux-apps.mk test failed: The component sqlite3 is not defined for LINUX_DIST_SUFFIX= (the corresponding variable sqlite3_FILE is not defined). This usually means that the current port should be used with non default linux base and/or infrastructure port(s) |
|
security/linux-f10-openssl |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
security/linux-f8-libssh2 |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
security/linux-f8-nss |
IGNORE: bsd.linux-apps.mk test failed: The component sqlite3 is not defined for LINUX_DIST_SUFFIX= (the corresponding variable sqlite3_FILE is not defined). This usually means that the current port should be used with non default linux base and/or infrastructure port(s) |
|
security/linux-f8-openssl |
IGNORE: bsd.linux-rpm.mk test failed: the port should be used with defined OVERRIDE_LINUX_NONBASE_PORTS, please read /usr/ports/UPDATING |
|
security/md5coll |
IGNORE: is only for i386, while you are running amd64 |
|
security/mosref |
IGNORE: is marked as broken: segmentation fault during build |
|
security/newpki-server |
IGNORE: is marked as broken: does not compile with OpenSSL 0.9.8b |
|
security/p5-SAVI-Perl |
IGNORE: is only for i386, while you are running amd64 |
|
security/pam_krb5 |
IGNORE: FreeBSD 5.x and above already ships with its own version of pam_krb5 |
|
security/pgp6 |
IGNORE: is marked as broken: Does not compile on !i386 |
|
security/py-gnutls |
error: missing_header |
|
security/saferpay |
IGNORE: is marked as broken: Does not compile with GCC 4.2 |
|
security/shibboleth-sp |
IGNORE: is marked as broken: Does not compile; author is investigating |
|
security/ssh |
IGNORE: is now deprecated: OpenSSH is a superior version of SSH which has been included in the FreeBSD base system since 4.0-RELEASE. To override this warning set the REALLY_WANT_SSH environment variable and rebuild |
|
security/tea-total |
IGNORE: is only for i386, while you are running amd64 |
|
security/tripwire |
IGNORE: is an interactive port |
|
security/tripwire-131 |
IGNORE: 'Please read http://www.tripwiresecurity.com/ for details of how to obtain the Tripwire source. Put the file Tripwire-1.3.1-1.tar.gz into the directory /home/pcvs/ports/distfiles and run make again.' |
|
security/tripwire12 |
NO_PACKAGE: requires local database to be built |
|
security/uberkey |
IGNORE: is only for i386, while you are running amd64 |
|
security/vscan |
IGNORE: is restricted: 'restrictive 30 day evaluation license' |
|
security/xmlsec |
IGNORE: is marked as broken: Does not compile on FreeBSD >= 7.0 |
|
shells/bush |
(unknown) |
|
shells/ksh93 |
IGNORE: has to be built manually: Doesn't build in tinderbox environment |
|
sysutils/afbinit |
IGNORE: is only for sparc64, while you are running amd64 |
|
sysutils/asapm |
IGNORE: is only for i386, while you are running amd64 |
|
sysutils/asr-utils |
IGNORE: is only for i386, while you are running amd64 |
|
sysutils/autopsy |
IGNORE: is an interactive port |
|
sysutils/bbapm |
IGNORE: is only for i386, while you are running amd64 |
|
sysutils/be_agent |
IGNORE: is only for i386, while you are running amd64 |
|
sysutils/binup |
IGNORE: is only for i386, while you are running amd64 |
|
sysutils/busybox |
IGNORE: is marked as broken: does not compile |
|
sysutils/condor |
IGNORE: has to be built manually: exceeds pointyhat filesize limit during compilation |
|
sysutils/cromwell |
IGNORE: is only for i386, while you are running amd64 |
|
sysutils/devcpu |
IGNORE: requires kernel source to be installed |
|
sysutils/dtc |
IGNORE: is marked as broken: bad plist |
|
|
